36m diameter API standard 650 SUG II tanks
In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the API standard 650 SUG II tanks reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.
API 650 external floating roof storage tanks are generally called external floating roof API standard 650 SUG II tanks tanks, which means that the storage tanks are externally open tanks without a dome design, and are equipped with vertical floating roofs. API 650 external floating roof storage tanks are usually used for large More than 20,000 cubic meters of open steel API standard 650 SUG II tanks storage tanks for storing volatile petroleum products such as crude oil, gasoline, kerosene, etc.
In December, 2018, our Vietnam customer purchased 352 tons SA387Gr12Cl2 and SA387Gr11Cl2 API standard 650 SUG II tanks steel plates for their tank fabrication project. The customer need those cargo urgently, and we keep many stock in warehouse , it only takes about 3days we collect total cargo for shipping to customer. The customer are very appreciate our quality and service. They API standard 650 SUG II tanks become our regular customer and repeat order to us every month.
}Strictly controlling the temperature in the API standard 650 SUG II tanks can effectively reduce the volatile consumption of oil in large oil storage tanks. Because the higher the temperature in the oil storage tank, the stronger the activity of oil molecules and the greater the volatilization consumption of the oil. Therefore, the temperature in the API standard 650 SUG II tanks must be reduced as much as possible. It is possible to reduce the direct sunlight temperature by painting white anticorrosive paint with good light reflectivity. It is also possible to use spray equipment to wash the top and wall of the API standard 650 SUG II tanks with water flow to reduce the volatilization consumption of the oil in the storage tank.
Provide special product requirements to meet the personalized needs of customers. The API standard 650 SUG II tanks company arranges production and shipment strictly according to the contract, and guarantees to supply goods according to the time agreed in the contract. Provide professional consultation: we guarantee to answer any professional and API standard 650 SUG II tanks technical questions raised by users within 1 hour; provide detailed information.
