27m diameter API 650 vertical welded storage tanks
Inspection of low-pressure storage tank Butt-weldsComplete penetration and complete fusion is required (to the degree mandated by the acceptance criteria for examination method utilized) for welds joining tank wall plates to API 650 vertical welded storage tanks tank wall plates. Examination for quality of welds shall be made using either the radiographic method specified in API 620 standard 7.15.1 and applied in 7.17, or alternatively, by agreement between the Purchaser and the Manufacturer, using the ultrasonic method specified in 7.15.3.1. In addition to the radiographic or ultrasonic examination, these welds shall also be visually examined as specified in 7.15.5. Furthermore, the Purchaser’s inspector may visually inspect all butt-welds for cracks, arc strikes, excessive undercuts, surface porosity, incomplete fusion, and other defects.
Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API 650 vertical welded storage tanks internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.
In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe API 650 vertical welded storage tanks for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.
}Before welding the API 650 vertical welded storage tanks, the professional skills of the welding personnel shall be fully assessed to ensure that the operators meet the corresponding welding qualifications. According to the technical standards, scientific and feasible process requirements are actually formulated. In the process of welding the edge plate of API 650 vertical welded storage tanks, electric welding is required on one side of the edge plate, so that the edge plate has a free shrinkage effect and greatly reduces the residual stress of the welding seam.
Both parties shall confirm the API 650 vertical welded storage tanks material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the API 650 vertical welded storage tanks steel plant.
