2024 aluminum bar API 650 SUG III tanks

The API 620 large storage tank nozzle neck is fabricated by welding from 1/2-in. plate. The materials in the tank wall, the nozzle neck, and the reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank wall are fully radiographed, double-welded butt joints. The longitudinal joint in the nozzle neck is of the same type API 650 SUG III tanks but is not radiographed; however, the longitudinal joint and all other parts of the nozzle-and-wall-plate assembly have been shop stress relieved after fabrication, as required by 5.25. The adequacy of the reinforcement and attachment welds shown in Figure F-6 shall be determined.

The outer FRP of API 650 oil tank will not produce electrolytic corrosion with groundwater and brine. The outer FRP will not corrode with gasoline, diesel oil and leaded gasoline API 650 SUG III tanks. The leakage detector can monitor the whole process 24 hours to eliminate the potential pollution. The leakage detection system is convenient for the inspection and maintenance of API 650 oil tank, and protects the original ecological environment of soil and groundwater.

"In year 2014, we participate Bangladesh national railway tender for steel plate making train carriage. We finally got the order 1000 tons and it took us 40 days to produce all the plates. The client gave very high comments to our service and API 650 SUG III tanks product quality.In year 2015, we won another tender for 1200 tons B480GNQR steel coils in Bangladesh, which you can find in the steel coil part."

As we know, the vertical metal tank, API 650 SUG III tanks is welded by many components, and the welding quality of each component determines the later use effect of the API 650 SUG III tanks. Professional API 650 SUG III tanks manufacturers should have a set of professional skills in the welding process of API 650 SUG III tanks. Key points for weld inspection of vertical metal tank, API 650 SUG III tanks:
1. It is strictly forbidden to paint the welds before passing the inspection.
2. Visual inspection shall be carried out for welds.
3. NDT shall be carried out on the weld.

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".