120ft diameter API standard 650 ground supported liquid storage tanks

High temperature heat transfer oil fin tube heating device for large API standard 650 ground supported liquid storage tanks has the advantage of high heat transfer efficiency. The high-temperature heat-conducting oil finned tube heating device adopts high-efficiency outer finned tubes. The outer finned tube coils are immersed in a water bath. Compared with ordinary light tubes, the contact area between the evaporation coils and the medium is increased. The total heat transfer coefficient of the coil is determined by the heat transfer coefficient outside the tube. This increases the heat flux per unit tube length and improves the overall heat transfer efficiency.

API standard 650 ground supported liquid storage tanks Pressure-relieving DevicesTanks shall be protected by automatic pressure-relieving devices that will prevent the pressure at the top of the tank from rising more than 10% above the maximum positive gauge pressure except as provided in API 620 standard 9.2.2.Where an additional hazard can be created by the exposure of the tank to accidental fire or another unexpected source of heat external to the tank, supplemental pressure-relieving devices shall be installed. These devices shall be capable of preventing the pressure from rising more than 20% above the maximum positive gauge pressure. A single pressure-relieving valve may be used if it satisfies the requirements of this paragraph and 9.2.1.

Application scope of API 650 petroleum storage tank:
1. API standard 650 ground supported liquid storage tanks Working pressure: atmospheric storage tank;
2. API 650 petroleum storage tank working temperature: -30℃～150℃;
3. API 650 petroleum storage tank liquid medium: various oil products, including naphtha, gasoline, diesel, kerosene, crude oil, fuel oil, heavy oil, benzene, xylene, methanol, ethanol;
4. API 650 petroleum storage tank volume: current design considerations generally do not exceed 10,000 cubic meters.