1100 aluminum tube API standard 650 self-anchored flat-bottom steel tanks

In this project, an elemental area of tank wall used is constructed of ASTM A442 Grade 55 steel plate subjected to a meridional unit force, T1, of 4000 lbf/in.2 tension and a latitudinal unit force, T2, of 5060 lbf/in.2 compression. The meridional radius of curvature, R1, is 75 in., and the length of the normal from the surface to the axis of revolution, R2, is 300 in. The joints in the wall are of double-welded butt-joint construction with a tensile efficiency of 85%. A corrosion allowance of 1/16 in. is required.
The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see 5.10.3.3).
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A442 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.

We also specialize in internal and external floating roofs, cathodic protection, primary and secondary containment, and storage tank foundations. Our staff are skilled in producing API 650 petroleum storage tanks. If you need to replace or repair API standard 650 self-anchored flat-bottom steel tanks API 650 petroleum storage tanks, please contact us in time. Every API 650 petroleum storage tank we make emphasizes quality and safety.

In 2016. Our company offer 1200 tons API 5L GR.B hot rolled coil to Bangladesh——100 tons for 3.9*625mm, and 1100 tons for 7*683mm. It is one tender project, we get the tender at the end of 2015, and arrange the production in 2016. They required the tolerance of thickness is +0.1/-0.2mm, and width tolerance is +/-0.5mm, which is a very high requirement for coil tolerance, but our mill handling this very well. and our Q/C department witness all of the process.

The specifications used in the design of large oil tanks, API standard 650 self-anchored flat-bottom steel tanks mainly include American Petroleum Institute Standard API 650, Japanese Industrial Standard JIS B8501, British Industrial Standard BS2654 and Chinese National Standard GB50341 from a global perspective. The formulas used in each specification are based on the hoop stress in the membrane theory. Each specification is based on the performance characteristics of materials and the construction technology level of their respective countries to determine the allowable stresses and weld coefficients. Therefore, the calculation results of tank wall thickness of API standard 650 self-anchored flat-bottom steel tanks with the same volume are sometimes quite different according to different specifications.

The results of adopting two-level API standard 650 self-anchored flat-bottom steel tanks service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and API standard 650 self-anchored flat-bottom steel tanks after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.