1100 aluminum tube API standard 650 flat-bottom steel tanks

The standard API 650 covers the design and calculation of different parts of the API standard 650 flat-bottom steel tanks fuel tank. This specification is based on the knowledge and experience of buyers, manufacturers and users of API 650 welded storage tanks of different sizes and capacities. It is worth noting that the code requirements are minimal; stricter standards can be adopted for specific applications.

Thickness as it Affects Preheat and Post-heat Requirements
Plate with thicknesses below 1/2 in. is reasonably notch tough. In most steels, when the API standard 650 flat-bottom steel tanks used plate thickness exceeds 3/4 in. – 1 in., notch toughness, particularly as welded, decreases sharply. The decrease in notch toughness can be minimized by the conventional post-heat treatment and, in many steels, by preheat treatment. The benefits of preheat treatment in steels 3/4 in. – 1 in. thick have been demonstrated; similar benefits could be expected in thicker steels, but sufficient experimental data are currently lacking.

The API standard 650 flat-bottom steel tanks must go through strict inspection before putting into use. Inspection of plate groove of API standard 650 flat-bottom steel tanks, vertical oil tank: After finishing the groove processing of oil tank plate, it is necessary to conduct dye penetrant inspection on the groove. This process is mainly aimed at the hard damage of groove in the machining process and the defects of the plate itself. If any defect is found, it shall be processed again until the defect disappears.

The company uses online training system to let all employees use fragmented time to carry out targeted training anytime, anywhere, regardless of time and geographical restrictions. Through training to improve API standard 650 flat-bottom steel tanks work skills, at the same time, through training, let all improve their own quality education level, let employees work around a goal, create a career and achieve results.

If you have any requirements for the mode of transportation of the API standard 650 flat-bottom steel tanks goods, we can also negotiate and meet your requirements. For logistics, first of all, we respect customers' opinions, and then choose the most convenient port and transportation mode with appropriate price for customers.

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.