1100 aluminum plate API 650 ground supported tanks

Ultrasonic testing can find the internal defects of API 650 ground supported tanks welding joint, this detection method is very accurate for the internal layer defects of oil tank, but ultrasonic detection is not suitable for the detection of thin-walled storage tank materials. Dye penetrant testing is only suitable for detecting the defects of the surface opening of API 650 ground supported tanks and so on metal oil tanks. The feature of this method is convenient and fast.

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 ground supported tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

Our company has sales department, technology department, quality inspection department, after-sales department, logistics department. Each department has professional knowledge and high professional quality, put customers first, think about the interests of customers, actively communicate with customers and solve problems smoothly.

This standard only applies to API 650 storage tanks API 650 ground supported tanks with uniform bottom support and non-refrigerated service storage tanks with a maximum design temperature of not more than 93 degrees Celsius (200 degrees Fahrenheit).