10ft diameter API Std 650 mechanically-anchored tanks

Butt-welded joints used to fabricate large steel storage tank fittings shall be completely radiographed. Lines carrying liquid shall be hydrostatically or pneumatically pressurized at a minimum pressure of 35 lbf/in.2 and API Std 650 mechanically-anchored tanks butt welded joints shall be simultaneously visually examined (hydrostatic) or solution film tested (pneumatic) for tightness. If manufactured pipe has been hydrostatically tested previously to ASTM requirements, then only circumferential welds need to be examined.

The characteristics of the API Std 650 mechanically-anchored tanks internal floating roof structure of API 650 petroleum storage tanks: the inner floating roof or inner floating plate refers to the floating roof that floats on the liquid surface of the oil tank with the oil and liquid up and down. The API Std 650 mechanically-anchored tanks inner floating roof is used to cover the liquid. The surface is currently recognized as the most ideal and most economical and practical way to reduce oil evaporation loss.

In 2016, we brought our customer to visit our NM400 hot rolled plate; producing line and our shanghai warehouse for 30,000 tons plate and structure. As a result, Our client purchased 500 tons NM400 as first order, which is shipped by 3 times. In future. Our company will always guarantee that all the delivery condition for Hardox plate API Std 650 mechanically-anchored tanks provided will be with quenching and tempering, which is the best delivery type according GB/T 24186 standard.

Due to irregular operation of API Std 650 mechanically-anchored tanks welding, there are many weld deformations during the construction process. Before specific operations, most construction units have formulated relatively complete construction plans and set up special welding process instructions, but the operators have not fully performed welding in accordance with various process guidance requirements and construction specifications, resulting in some quality problems of oil storage tanks. How can we reduce or even avoid this kind of situation?

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.