10.5m diameter API 650 self-anchored flat-bottom steel tanks

API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API 650 self-anchored flat-bottom steel tanks. It can be any tank size.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.

API 620 Crude Oil Tank Pneumatic Pressure
An air pressure equal to 1.25 times the pressure for which the vapor space is designed shall be applied to the enclosed space above the water level. In the case of a double-wall tank with an open-top inner tank, where the air pressure acts against the outer tank and the inner tank is thus not stressed by the air pressure, the inner API 650 self-anchored flat-bottom steel tanks may be emptied of water before the pneumatic pressure test begins. The test pressure shall be held for 1 hour.

With the continuous development of large-scale oil storage tanks, the foundation of API 650 self-anchored flat-bottom steel tanks has also continued to grow. Among them, API 650 self-anchored flat-bottom steel tanks vertical oil tanks are storage tanks commonly used to store crude oil, diesel, gasoline and other oil materials. This type of storage tank is set up as a cylindrical shape. The bottom of the tank is a circular flat bottom plate, and the load surface of the oil tank is basically horizontal, which can generally be regarded as a uniform load, and has greater flexibility.