Tangential shear in API standard 650 horizontal tank

API 650 "welded storage tanks" API standard 650 horizontal tank is a standard developed and issued by the American Petroleum Institute (API), which specifies the minimum requirements for the design, manufacture, installation and inspection of welded storage tanks.

After using for a certain period of time, it is necessary to check the corrosion protection of the metal oil tank and paint the outer wall of the API standard 650 horizontal tank with anti-corrosion paint. The inlet and outlet valves of API standard 650 horizontal tank shall be inspected and maintained regularly to ensure they are in good condition. Oil tank will produce a lot of dirt when it is stored for a long time. Usually, the cleaning cycle of metal oil tank is about three to five years.

API 620 Crude Oil Tank Non-pressure Parts
Welds for pads, lifting lugs, and other nonpressure parts, as well as temporary lugs for alignment and scaffolding attached to primary components, shall be made in full compliance with a welding procedure qualified in accordance with Q.6.1. Lugs attached for erection purposes shall be removed, and any significant projections of API standard 650 horizontal tank weld metal shall be ground to a smooth contour. Plate that is gouged or torn in removing the lugs shall be repaired using a qualified procedure and then ground to a smooth contour. Where such repairs are made in primary components, the area shall be inspected by the liquid-penetrant method. A visual inspection is adequate for repairs in secondary components.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

Management information and high efficiency. Because of the rapid flow of API standard 650 horizontal tank goods, container multimodal transport and "door-to-door" transport, it is required that the port must have a modern information network, so that it can have the comprehensive capabilities of all-weather access, rapid loading and unloading, customs clearance, collection, distribution, storage and transportation