Steel plate for shells of API Std 650 aboveground petroleum storage tanks

API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API Std 650 aboveground petroleum storage tanks. It can be any tank size.

API Std 650 aboveground petroleum storage tanks weld tightness test: remove dirt from the API Std 650 aboveground petroleum storage tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.

Low-pressure Storage Tanks for Liquefied Hydrocarbon Gases
API Std 650 aboveground petroleum storage tanks Primary Components: In general, primary components include those components that may be stressed to a significant level, those whose failure would permit leakage of the liquid being stored, those exposed to a refrigerated temperature between –60°F and –270°F, and those that are subject to thermal shock. The primary components shall include, but will not be limited to, the following parts of a single-wall tank or of the inner tank in a double-wall tank: shell plates; bottom plates; roof plates; knuckle plates; compression rings; shell stiffeners; and manways and nozzles including reinforcement, shell anchors, pipe, tubing, forgings, and bolting.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

Land transportation inquiry: (RMB fee) it is required to master the kilometers and towing price of major cities; packing price of each port area; customs clearance fee, commodity inspection fee, and animal and plant inspection fee standard. Key information to be clarified after accepting the consignation of the consignor (generally fax): shipping date, number of packages, box type, box quantity, gross weight and volume.