Shop-assembled API Std 650 open-top tanks

Our technical department plays important role in our professional communication with customers, especially those who have high technical requirements for steel materials and those who need complex further processing. Under such condition, our technician department can provide technical support in time, anylize customer design or make drawing according to customer needs rapidly, so that we can proceed smoothly. The profession of our team has won great praise of customers.Test plates shall be welded using the same qualified welding procedure and electrodes that are required for the tank shell plate joints. The API 620 steel storage tank test plates need not be welded as an extension of the tank shell joint but shall be welded in the required qualifying positions. One test weld shall be made on a set of plates from each specification and grade of API Std 650 open-top tanks plate material, using a thickness that would qualify for all thicknesses in the shell. Each test welded of thickness t shall qualify for plate thicknesses from 2t down to t/2, but not less than 5/8 in. For plate thicknesses less than 5/8 in., a test weld shall be made for the thinnest shell plate to be welded; this test weld will qualify plate thicknesses from t up to 2t.This standard applies only to API 650 tank API Std 650 open-top tanks whose entire bottom is uniformly supported and to API 650 tank in non-refrigerated service that have a maximum design temperature of 93°C (200 °F) or lessTo the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with lawFor our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees,API Std 650 open-top tanks. Oil measuring hole: The oil measuring hole is used to measure the height, temperature and sampling of the oil stored in the tank, and is installed near the tank top platform. API Std 650 open-top tanks Fire extinguisher: The fire extinguisher (also known as the flame arrestor) of the oil tank is composed of a fire box, a copper wire mesh and an aluminum partition. It is installed under the breathing valve or safety valve to prevent sparks and air from entering the inside of the tank through the breathing valve or safety valve and causing accidents.