Optional design procedures of API Std 650 flat-bottom steel tanks

All edges of the inner wall of the API 650 petroleum storage tank to be lined or coated must be rounded and flat to a minimum radius of 3mm. The API Std 650 flat-bottom steel tanks internal welding seam must be completely sealed welding, with a smooth surface and no air holes, air pockets and local protrusions. Remove welding spatter. As specified in API 650 petroleum storage tank design drawings, the seller must perform additional surface treatment.

Before welding the API Std 650 flat-bottom steel tanks, the professional skills of the welding personnel shall be fully assessed to ensure that the operators meet the corresponding welding qualifications. According to the technical standards, scientific and feasible process requirements are actually formulated. In the process of welding the edge plate of API Std 650 flat-bottom steel tanks, electric welding is required on one side of the edge plate, so that the edge plate has a free shrinkage effect and greatly reduces the residual stress of the welding seam.

Uplift on Foundation
For API Standard 620 tanks with an internal design pressure less than 1 lbf/in.2 gauge, the uplift shall be taken as the smaller of the maximum uplift values computed under the following conditions:
a)The internal design pressure times 1.5 plus the design wind load on the shell and roof.
b)The internal design pressure plus 0.25 lbf/in.2 gauge plus the design wind load on the shell and roof.

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

Ningbo port has trade and transportation with more than 50 countries and regions, such as the United States, CIS countries, Europe, Africa, Japan and South Korea, Southeast Asia, the Middle East and Hong Kong. Ningbo port has initially formed an all-round three-dimensional collection and distribution network of expressways, railways, aviation, river sea intermodal transport, water to water transfer, etc.