ISO 630 plates API 650 mechanically-anchored steel tanks

Welding certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For both API 650 mechanically-anchored steel tanks storage tank API 650, non-destructive inspection is required, but third-party inspection is not required.

The API 650 mechanically-anchored steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

Proper use of API 650 mechanically-anchored steel tanks and precautions:
1. The API 650 mechanically-anchored steel tanks must be used within the safe height range;
2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;
3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;
4. The oil level in the API 650 mechanically-anchored steel tanks should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;
5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.

The company revolves around the long-term strategy of "building a quality base and building a century-long BEBON", adheres to the development ideas of innovation, transformation, and improvement, vigorously promotes transformation and upgrading, structural adjustment, energy conservation and emission reduction, and strives to create high-quality steel with strong core competitiveness and distinctive features The production base has become a green steel city with intensive land use, clean production, efficient use of resources, harmonious and friendly production and environment, business and society, and BEBON characteristics.

After years of operation and accumulation, the company has formed an operation network covering major economic cities across the country, with a group of high-quality professional logistics technicians and management personnel, strong strength and stable logistics channels. The company's business operations include the loading and unloading of steel raw materials and finished materials, API 650 mechanically-anchored steel tanks warehousing, and freight transportation. Our logistics service business has passenger transportation, automobile and construction machinery inspection, logistics information management and operations.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.