ISO 630 grade E275 quality C plates API Std 650 self anchored flatbottom tanks

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API Std 650 self anchored flatbottom tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

Aftershock Level Earthquake (ALE)
This design case shall be applicable only when regulations or project documents specifically require the tank system to be designed or evaluated for aftershocks.
If the outer tank is not designed as a secondary containment (i.e. it serves as vapor barrier and pressure boundary only and is not constructed of API 620 material suitable for the inner tank API Std 650 self anchored flatbottom tanks), then no design or evaluation for ALE is required by these provisions for the inner or outer tank.

Oil tank is often used to store crude oil, diesel oil, gasoline and other oil. The main structure of API Std 650 self anchored flatbottom tanks is composed of tank top, tank wall, tank bottom and accessories. The API Std 650 self anchored flatbottom tanks should be inspected after the completion of construction, and the detection methods of different structure positions are different. Tank wall inspection: for the newly built oil tank, water filling test shall be conducted to check whether the tank wall is tight, and the appearance inspection shall be conducted for the tank wall plate and weld. Tank wall thickness detection: the oil tank wall thickness is mainly detected by ultrasonic wave, with high efficiency.

The company uses online training system to let all employees use fragmented time to carry out targeted training anytime, anywhere, regardless of time and geographical restrictions. Through training to improve API Std 650 self anchored flatbottom tanks work skills, at the same time, through training, let all improve their own quality education level, let employees work around a goal, create a career and achieve results.

Japan is a typical shipping first, and its raw materials are imported from Oceania, central and South America and other Asian countries. Most of the API Std 650 self anchored flatbottom tanks steel produced is exported to China and other Asian countries, and a small amount is exported to America. Shipping is the main way of its API Std 650 self anchored flatbottom tanks steel international transportation. According to the data, steel goods account for about 20% of the total sea freight in Japan. The domestic transportation of Japanese steel is mainly truck.

Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!