Erection requirements for API 650 flexible liquid storage tanks

API 650 petroleum storage tanks are used for API 650 flexible liquid storage tanks storage. API 650 petroleum storage tanks can be made of carbon steel, austenitic stainless steel and nickel alloy (only for low temperature). Welding API 650 flexible liquid storage tanks certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For API 650 petroleum storage tanks, non-destructive inspections are required, but third-party inspections are not required.

The cleanliness of the API 650 flexible liquid storage tanks has a great influence on the safety of the tank and the quality of the oil stored. Keeping the API 650 flexible liquid storage tanks clean can slow down the corrosion of the tank wall and reduce the pollution to the oil. If the inside of the API 650 flexible liquid storage tanks is not cleaned all the year round, a lot of rust and metal impurities will be produced in the tank. These impurities will cause the oil to slowly oxidize and deteriorate. The impurities mixed into the oil will also block the filter and oil circuit, causing oil supply failure.

Data Required from Manufacturer on Completed TanksIf specified in the purchase order, the Manufacturer shall supply marked copies of plans (or a separate sketch) showing the location of all plates, with a means of identifying each plate with the heat numbers. These markings shall be checked by the inspector. A copy shall be attached to the Manufacturer’s report.Check of Stress-relieving OperationThe API 650 flexible liquid storage tanks inspector shall check any thermal stress-relieving operation and shall be satisfied that the temperature readings are accurate and that the procedure conforms to the applicable requirements of these rules.

After more than 20 years of ups and downs in the steel industry, BBN company's customers have covered South America, North America, Europe, Africa, Southeast Asia and the Middle East and other countries and regions. We treat every customer who inquires with us sincerely, whether you cooperate with us or not, we will provide you with the best quality steel solutions. Our company team also support the online customer service.

The mode of iron and API 650 flexible liquid storage tanks steel logistics transportation is mainly intercontinental ocean shipping and inland rail transportation. European ports have been very mature after years of development, such as Hamburg in Germany, Rotterdam in the Netherlands and Antwerp in Belgium. Relying on the huge market of the European Union, these ports are positioned in the logistics distribution function of cargo distribution and large import and export, and play a great role in the transportation of API 650 flexible liquid storage tanks steel logistics.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!