double-deck-type floating roof API standard 650 fixed roof tanks

High temperature heat transfer oil fin tube heating device for large API standard 650 Fixed roof tanks has the advantage of high heat transfer efficiency. The high-temperature heat-conducting oil finned tube heating device adopts high-efficiency outer finned tubes. The outer finned tube coils are immersed in a water bath. Compared with ordinary light tubes, the contact area between the evaporation coils and the medium is increased. The total heat transfer coefficient of the coil is determined by the heat transfer coefficient outside the tube. This increases the heat flux per unit tube length and improves the overall heat transfer efficiency.

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API standard 650 fixed roof tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

Application scope of API 650 petroleum storage tank:
1. API standard 650 fixed roof tanks Working pressure: atmospheric storage tank;
2. API 650 petroleum storage tank working temperature: -30℃～150℃;
3. API 650 petroleum storage tank liquid medium: various oil products, including naphtha, gasoline, diesel, kerosene, crude oil, fuel oil, heavy oil, benzene, xylene, methanol, ethanol;
4. API 650 petroleum storage tank volume: current design considerations generally do not exceed 10,000 cubic meters.