Design requirements of API Std 650 liquid-storage tanks

It is very important for an enterprise to have a sound after-sales service system, which not only ensures the normal outflow and inflow of the company's products, but also improves the trust of the company's products in the hearts of customers. Our company has a special after-sales service team and good after-sales service reputation. In case of any problem in the use of our steel products API Std 650 liquid-storage tanks , whether quality problem or not, the after-sales service department will assist in solving the problem as soon as possible, and regularly consult and track the use of the steel products.

The coating on the outer wall of API Std 650 liquid-storage tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API Std 650 liquid-storage tanks with white coating can reduce the evaporation consumption of the oil tank.

The horizontal projection of the roof plate within the compression-ring region is 4.9 x 0.866 = 4.25 in., which fulfills the requirement of API 620 tank standard 5.12.5.1. The required area and horizontal projection can be provided by any of the standard angles listed in Table F-3.
Any of these angles may be used in accordance with the details of Figure 5-6, detail a or b, but if details c, h, or i in Figure 5-6 were intended, the net area of the angle must be calculated by deducting the area expected to be lost by corrosion from that part of the angle surface that is exposed to the interior of the tank.