Design and construction of foundations for API 650 self anchored flatbottom tanks

API 650 petroleum storage tank specifications and standards are documents verified by the customer (owner) under different operating conditions; however, API 650 self anchored flatbottom tanks it must be verified whether these API 650 petroleum storage tank documents are suitable for use and whether they comply with applicable design specifications and/or specifications.

Surface Inspection of low-pressure storage tank Component PartsBefore assembly, unless already so certified by shop inspectors, all sidewall plates or sections and roof and bottom plates shall be inspected for thickness, freedom from injurious defects, and soundness of any welded joints.Check of Dimensions of API 650 self anchored flatbottom tanks Component PartsAll formed plates and curved sections shall be checked for conformance with the planned dimensions and cross section. For unusual repairs the inspector should keep a record of measurements taken at sufficient intervals to constitute a satisfactory record.Check of Chemical and Physical Property DataThe inspector shall check the material being assembled by the lists of the plates from the mill, their heat numbers, chemical analyses, and mechanical properties as given on mill reports and shall see that copies are available to be attached to the Manufacturer’s report.

Anti corrosion of API 650 self anchored flatbottom tanks:
After using for a certain period of time, it is necessary to check the corrosion protection of the API 650 self anchored flatbottom tanks. If necessary, the outer wall of the metal oil tank should be painted with new anti-corrosion paint to ensure that the outer wall of the API 650 self anchored flatbottom tanks does not fall off and has good waterproof and rust resistance.
API 650 self anchored flatbottom tanks cleaning:
The long-term use of API 650 self anchored flatbottom tanks will produce impurities on the tank wall and deposit on the tank bottom, resulting in tank corrosion to leakage. According to the safety standard of oil tank, the API 650 self anchored flatbottom tanks shall be cleaned and derusted regularly to ensure the quality of oil stored and the safety of oil tank equipment.

Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.

In addition to our own truck fleet, we also have long-term cooperation with certain logistics companies to ensure that we can deliver API 650 self anchored flatbottom tanks goods in time and smoothly. At the same time, because of the long-term cooperation and huge shipping volume, we can get a good transportation price and save transportation cost for the company and customers. Meanwhile, we have Shipping Department to arrange shipping work in advance. So as not to waste time on transportation both in land and on the sea.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.