CSA G40.21 plates API standard 650 cylindrical liquid-storage tank

BEBON is a large steel group with finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. We are committed to creating a various culture system with its own characteristics, and work hard to create a first-class steel plate company in China. Based on the business philosophy of quality-oriented and strengthened management, the company continues to develop in this industry.

Requirements for prefabrication of the top of large vertical API standard 650 cylindrical liquid-storage tank: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

Structural shapes of 9% and 5% nickel steel may be furnished to the chemical and physical requirements of ASTM A353, A553, or A645. Physical tests shall be in accordance with the requirements of ASTM A6.
API standard 650 cylindrical liquid-storage tank used Piping, Tubing, and Forgings
Material used for piping, tubing, and forgings shall be compatible in welding strength, and thermal expansion coefficient with the tank shell material. In addition to the specific requirements of this appendix, all piping within the limitations of 1.3.2 shall fulfill the minimum requirements of ASME B31.3.