CSA G40.21 Gr 260WT plates API Std 650 liquid storage tanks
The inner and outer tanks may be decoupled for seismic design of the tank and anchorage and assumed to act independently. However, if the inner and outer tanks API Std 650 liquid storage tanks are supported by a common foundation, the seismic foundation loading shall be calculated using the lesser response modification values for either the inner tank or outer tank for both tanks and a dynamic analysis shall be performed to determine the combined effect.Allowable Stresses: For Appendix R tanks, design allowable stresses shall be per API 620 large low pressure storage tank, Section R.3.3.
The Standard has gained international recognition and is the standard of choice of most builders of large liquid above ground API Std 650 liquid storage tanks storage tanks. One reason for this is that the API 650 Standard was created and is revised by API committees comprised of the world s best tank structural engineers who also rely on the experience of tank owners and tank construction companies.
Proper use of API Std 650 liquid storage tanks and precautions:1. The API Std 650 liquid storage tanks must be used within the safe height range;2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;4. The oil level in the API Std 650 liquid storage tanks should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.