Copper-bearing steel sheets API standard 650 self-anchored flat-bottom tanks

The API standard 650 self-anchored flat-bottom tanks outer wall shall be designed for the purging and operating pressure of the space between the inner and outer tank shells and for the loading from the insulation, the pressure of wind forces, and the roof loading.
The outer tank bottom, shell, and roof shall have a minimum nominal thickness of 3/16 in. (7.65 lbf/ft2) and shall conform to the material requirements of Q.2.3.

The calculated thickness of the above-mentioned wall panels required by the hydrostatic pressure is also It API standard 650 self-anchored flat-bottom tanks should be increased by the same ratio, unless special analysis is performed to determine the seismic overturning moment and the corresponding stress at the bottom of the wall of each layer of API 650 tank.

BBN had provided API standard 650 self-anchored flat-bottom tanks Hardox plates for more than 15 years for widely applied in coal mining machinery, cement equipment, road construction machinery, engineering machinery, dump trucks, metallurgical area and port fields. In 2016,we brought our customer to visit our API standard 650 self-anchored flat-bottom tanks NM400 steel plate producing line and our Shanghai warehouse for 30000 tons plate and structure. As a result, Our client purchased 500 tons NM 400 as first order, which is shipped by 3 times. In future, BBN will always guarantee that all the delivery condition for Hardox plate provided will be with quenching and tempering, which is the best delivery type according GBT 24186 standard.

During heavy rain, closely observe the change of the water level in the storage area of the API standard 650 self-anchored flat-bottom tanks. If the water level rises to the dangerous range, drain the water immediately. There are more thunderstorms in heavy rain, and lightning protection devices should be installed in the API standard 650 self-anchored flat-bottom tanks area to avoid lightning accidents. Observe the groundwater level of the API standard 650 self-anchored flat-bottom tanks area at any time, clean and dredge the drainage ditch in time to ensure unobstructed drainage, and prevent the bottom of the API standard 650 self-anchored flat-bottom tanks from leaking and rusting due to untimely drainage.

With a high-quality and complete after-sales service system, the company solves the user's hindrance and improves the reliability of steel API standard 650 self-anchored flat-bottom tanks product quality. Reaching every corner of the globe with professional services, users anywhere can get thoughtful and detailed services form us is our pursue. We promise all our steel materials are manufactured and tested in accordance with responding standards. We will take full responsibility for the quality of the steel materials we provide.