ASTM A737 plates API 650 storage tank

The calculated thickness of the above-mentioned wall panels required by the hydrostatic pressure is also It API 650 storage tank should be increased by the same ratio, unless special analysis is performed to determine the seismic overturning moment and the corresponding stress at the bottom of the wall of each layer of API 650 tank.

Operation points of sand blasting rust removal for metal storage tank, API 650 storage tank:
1. The equipment should be as close as possible to the workpiece to be processed, so as to reduce the pipeline length and pressure loss, avoid excessive pipeline wear, and facilitate the construction personnel to contact each other.
2. The jet pipe should be straight as much as possible to reduce the concentrated wear at the bend. The wear direction of the bend should be changed frequently to prolong the service life of the pipe.
3. Strictly control the process parameters.

Impact Tests for High Alloys
Impact tests are not required for oil steel storage material nickel alloy welds made with electrodes/filler metals covered by AWS Specification A5.11 or AWS Specification A5.14, provided the nominal nickel content is 50% or greater, and the weld is deposited by the shielded metal-arc welding (SMAW), gas metal-arc welding (GMAW), gas tungsten-arc welding (GTAW), or plasma-arc welding (PAW) processes. When A5.11/A5.14 specifies the nickel content as a “remainder,” the nickel content shall be determined by summing the maximum specified values of the other elements (use the average specified value for elements with specified ranges) and subtracting from 100%.

When talking about our team, it is hard not to mention our QC department (Quality Control). We have built strict qualitycontrol system to guarantee the steel quality. During the steel materials production, we have strict monitoring measures and indicators, and ensure no chemical composition, mechnical properties and so on technical problems for the steel materials API 650 storage tank. After production, our QC department will conduct another inspection regarding to the steel quantity, dimension, mark and so on points before delivery.

With the development of multimodal transport in the international shipping market and the increase of the complexity of the integrated transport chain, modern ports, as the intersection of the three transportation modes of sea, land and air, are developing from traditional transfer and product distribution functions to all-round value-added services, becoming the central link connecting the world's production, exchange, distribution and consumption, and supporting the world economy and international trade An important part of the developed international circulation system.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!