ASTM A36 plates API 650 welded storage tanks
Under the same sealing effect, the internal floating roof tank of API 650 oil storage tank can further reduce the evaporation loss compared with the API 650 welded storage tanks External floating roof tank. This is due to the shielding of the fixed roof and the gas layer between the fixed roof and the internal floating plate, which has more significant heat insulation effect than the double disc floating roof of the API 650 welded storage tanks external floating roof tank. =====API 650 tank has the advantages of less load on the floating plate, simple and light structure, and can save the central drainage pipe and rotating floating ladder on the API 650 welded storage tanks floating plate. The materials for easy construction and maintenance and sealing parts can avoid aging due to sunlight.
The manufacturing requirements of bottom plate of vertical metal tank, API 650 welded storage tanks are as follows: 1. In order to compensate welding shrinkage, the layout diameter of tank bottom is 5-2mm than the design diameter; 2. The butt joint of edge plate of tank bottom shall be machined automatically or semi-automatically; 3. The distance between any two adjacent welding joints on the tank bottom plate and the distance between the butt joint of edge plate and the longitudinal weld of bottom ring wall plate shall not be greater than 200 mm.
The cultural construction must let the enterprise staff participate in the enterprise culture, in order to better carry on the effective dissemination enterprise idea, the sharing value system, such as the internal communication, the newspaper, the forum, the propaganda, the news announcement and so on. At the same time, the system can also be used to educate and train employees, send blessings to employees on their birthdays or during Chinese New Year holidays, so that employees can feel the practice of corporate culture, the warmth of the enterprise, and enhance the sense of belonging and recognition of the enterprise.
Pressure Setting of Safety DevicesExcept as provided in API 620 tank 9.5 for certain liquid relief valves, the pressure setting of a pressure-relieving device shall in no case exceed the maximum pressure that can exist at the level where the device is located when the pressure at the top of the tank equals the nominal pressure rating for the tank (see API 620 tank 5.3.1) and the liquid contained in the tank API 650 welded storage tanks is at the maximum design level.Vacuum-relieving devices shall be set to open at such a pressure or partial vacuum that the partial vacuum in the tank cannot exceed that for which the tank is designed when the inflow of air (or other gas or vapor) through the device is at its maximum specified rate.