API Std 650 SUG I tanks documentation requirements

We also specialize in internal and external floating roofs, cathodic protection, primary and secondary containment, and storage tank foundations. Our staff are skilled in producing API 650 petroleum storage tanks. If you need to replace or repair API Std 650 SUG I tanks API 650 petroleum storage tanks, please contact us in time. Every API 650 petroleum storage tank we make emphasizes quality and safety.

Density of API Std 650 SUG I tanks Liquid Stored
The density of the liquid stored shall be its maximum density within the range of design temperatures, but no less than 29.3 lbf/ft3 for methane, 34.21 lbf/ft3 for ethane, and 35.5 lbf/ft3 for ethylene.
Design Metal Temperature
The design metal temperature of each component exposed to the liquid or vapor being stored shall be the lower of the temperatures specified as follows: The design metal temperature of the components of the API 620 single-wall tank or the inner tank of a double-wall tank shall be the minimum temperature to which the tank contents shall be refrigerated, including the effect of subcolony at reduced pressure."

Requirements for prefabrication of the top of large vertical API Std 650 SUG I tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.

The mode of iron and API Std 650 SUG I tanks steel logistics transportation is mainly intercontinental ocean shipping and inland rail transportation. European ports have been very mature after years of development, such as Hamburg in Germany, Rotterdam in the Netherlands and Antwerp in Belgium. Relying on the huge market of the European Union, these ports are positioned in the logistics distribution function of cargo distribution and large import and export, and play a great role in the transportation of API Std 650 SUG I tanks steel logistics.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide API Std 650 SUG I tanks reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.