API Std 650 self-anchored flat-bottom tanks metal-seated ball valve

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API Std 650 self-anchored flat-bottom tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

The coating on the outer wall of API Std 650 self-anchored flat-bottom tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API Std 650 self-anchored flat-bottom tanks with white coating can reduce the evaporation consumption of the oil tank.

Any joints between the adjacent sections of API 620 oil storage tank stiffening rings, as shown in Figure Q-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joint ends. All weld passes shall be started at the rat hole and other weld joint ends and shall be completed by moving away from these ends. Passes shall be overlapped away from edges to provide a smooth continuous weld.

Our after sales department is an very important part of our department structures. After the customer receive steel materials, our after sales department will follow up regularly and solve problems for them in time if they have the needs. We romise to return the goods for free for its lifetime if it is quality of the steel material itself. Meanwhile, if you have any advice or complaints, also welcome to feed back to our after sales department, and we are trying to give better service to you.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the API Std 650 self-anchored flat-bottom tanks steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.