API Std 650 mechanically-anchored flat-bottom tanks welding methods

API 650 internal floating roof API Std 650 mechanically-anchored flat-bottom tanks tank can be used to store gasoline, jet fuel and other volatile oil products, as well as aldehydes, alcohols (methanol, ethanol), ketones (acetone), benzene (benzene, toluene, xylene, styrene) and other liquid chemicals.

API Std 650 mechanically-anchored flat-bottom tanks weld tightness test: remove dirt from the API Std 650 mechanically-anchored flat-bottom tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.

Cylindrical Oil storage tanks Discharge Pipes
When a discharge pipe is used on the outlet side of such relieving devices, its area shall be not less than the area of the valve outlet, or if a single pipe provides for discharge from several relief devices, its area shall be not less than the aggregate area of the valve outlets. The API Std 650 mechanically-anchored flat-bottom tanks discharge pipe shall be fitted with an open drain to prevent water or other liquids from lodging in the discharge side of the valves.
Discharge pipes shall be supported so that no undue stress is placed on the valve body. Open discharges shall be placed and oriented so that the outflow is directed away from the tank and will not create a hazard over walkways, stairways, or operating platforms.

Our company's technical department is the core department of the whole company. There are a group of very professional technical personnel. They provide some architectural drawings according to the ideas of customers, and they are responsible for how to select the right materials. Including the evaluation of steel products such as multi steel plate, API Std 650 mechanically-anchored flat-bottom tanks and steel pipe, grasp the whole production process, and strictly follow the production standards and customer quality requirements.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the API Std 650 mechanically-anchored flat-bottom tanks steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the API Std 650 mechanically-anchored flat-bottom tanks steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the API Std 650 mechanically-anchored flat-bottom tanks steel sheet on the truck Good luck.