API Std 650 mechanically-anchored flat-bottom tanks primary seal

Prefabrication requirements for API Std 650 mechanically-anchored flat-bottom tanks, large vertical storage tanks:
1. The machined surface of the edge of the steel plate should be smooth, and there should be no defects such as slag inclusion, delamination, cracks, etc., and the surface hardened layer produced by the flame cutting groove should be removed.
2. Dimension deviation after steel plate processing: the deviation of plate width is less than 1.5 mm, the deviation of plate length is less than 2 mm, and the difference between diagonals is less than 3 mm.

Preheat Treatment
Many laboratory tests have shown preheat treatment of carbon steel to 300°F-400°F to be the equivalent of the post-heat treatment at no less than 1100°F insofar as the physical properties of the weldment are concerned.40,41 Some tests have indicated a slight advantage of the post-heat treatment. Most of the tests have been made on plates 3/4 in. - 1 in. thick; results must be viewed with caution if preheating is applied appreciably beyond this thickness range. However, for all practical purposes, improvement resulting from preheating is sufficiently well established so that preheat should be considered for field fabrication of API 620 crude oil tank plates over 3/4-in. thick whenever toughness of the tank API Std 650 mechanically-anchored flat-bottom tanks is highly desired and the thermal post-heat treatment is impractical.

We also specialize in internal and external floating roofs, cathodic protection, primary and secondary containment, and storage tank foundations. Our staff are skilled in producing API 650 petroleum storage tanks. If you need to replace or repair API Std 650 mechanically-anchored flat-bottom tanks API 650 petroleum storage tanks, please contact us in time. Every API 650 petroleum storage tank we make emphasizes quality and safety.

Management concept: integrity is the cornerstone, talent is the foundation, and service is the key.Business philosophy: to keep faith, to win by quality, customer first, win-win development.Based on integrity, win customers with good reputation, win competition with excellent product quality, improve service with customer orientation, and pursue the goal of win-win development in cooperation with customers.Sincerely welcome customers to visit and negotiate business.

Over the years, the company has maintained long-term stable business relationships with major domestic steel mills and foreign steel companies. The company's main boiler and pressure vessel steel plates, low alloy high-strength steel plates, wear-resistant steel plates, corrosion-resistant steel plates, API Std 650 mechanically-anchored flat-bottom tanks bridge steel plates , strucural teel plates, steel plates for alloy structures, mold steel plates, steel plates for shipbuilding and production platforms, composite steel plates, steel plates for oil and gas pipelines. Welcome to come China and visit our API Std 650 mechanically-anchored flat-bottom tanks production line.