API Std 650 low-alloy steel tanks linings

Welding of Large Steel storage tank Primary Components
a)Longitudinal and circumferential shell joints and joints that connect the API Std 650 low-alloy steel tanks annular bottom plates together.
b)Joints that connect sections of compression rings and sections of shell stiffeners together. Backup bars may be used for these joints with complete penetration and complete fusion detail.
c)Joints around the periphery of a shell insert plate.
d)Joints that connect the shell to the bottom, unless a method of leak checking is used (see Q.8.2.1).

API 650 petroleum storage tank basic knowledge, storage tank concept and use: API Std 650 low-alloy steel tanks storage equipment for storing crude oil, gasoline, kerosene, petroleum and various non-volatile chemicals, API 650 petroleum storage tank is a storage and transportation system facility, oil refining, chemical industry An important part of the device.

In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.

API Std 650 low-alloy steel tanks Manhole: The manhole is used for the operator to enter and exit the oil tank for inspection, cleaning and repair. For the convenience of personnel access, the installation position of the manhole is generally on the center line of the oil tank bottom, and the vertical oil tank is installed at the lowest layer of the tank wall. API Std 650 low-alloy steel tanks Light-transmitting hole: Light-transmitting hole is also called day-lighting hole. It is used for lighting and ventilation when inspecting, repairing and scrubbing the oil tank. It is generally installed on the top of the oil tank above the inlet and outlet pipes.