API Std 650 ground-supported liquid storage tanks slab foundations

Production Weld Tests
Production weld test plates shall be welded for API Std 650 ground-supported liquid storage tanks primary-component butt-welded shell plates when welding procedure qualifications are required to be impact tested per Q.6.2 and Q.6.3. The number of production weld tests shall be based on the requirements of Q.6.6.3 and Q.6.6.4. The locations impact tested (i.e., HAZ and/or weld deposits) shall likewise be the same as required for weld procedure qualifications per Q.6.2 and Q.6.3. Weld testing shall be in accordance with Q.6.6.5. Test plates shall be made from plates produced only from the heats that are used to produce the shell plates for the large welded steel tank.

Fabricated to API standard 650 Welded Tanks for Oil Storage Shop Assembled API Std 650 ground-supported liquid storage tanks Storage Tanks, these tanks are commonly used at oil and natural gas terminals, API Std 650 ground-supported liquid storage tanks processing plants, and midstream facilities located along pipelines at the pumping, compression, or metering stations. API 650 storage tanks are designed and fabricated considering operating pressures up to 2.5 PSIG, corrosion allowance, wind loading, and seismicity.

We have lots of successful cases, for example in July 2015, we exported 5714 tons ASTM A36 mild steel plate to Peru. After receiving the plates and putting then into use, our customer spoke highly of the ASTM A36 mild steel plate quality. In addition, the customer also introduced us an Venezuela customer, who bought 933 tons A36 steel API Std 650 ground-supported liquid storage tanks plate from us. And then in Mar. 2016, due to the first cooperation in July 2015 is very successful. The customer is very satisfied with our product quality and comprehensive service. This time, the customer place an 3989 tons order directly.

Oil tank is often used to store crude oil, diesel oil, gasoline and other oil. The main structure of API Std 650 ground-supported liquid storage tanks is composed of tank top, tank wall, tank bottom and accessories. The API Std 650 ground-supported liquid storage tanks should be inspected after the completion of construction, and the detection methods of different structure positions are different. Tank wall inspection: for the newly built oil tank, water filling test shall be conducted to check whether the tank wall is tight, and the appearance inspection shall be conducted for the tank wall plate and weld. Tank wall thickness detection: the oil tank wall thickness is mainly detected by ultrasonic wave, with high efficiency.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.