API Std 650 floating-roof tanks guide pole erection tolerance requirements

The process parameters should be strictly controlled in sand blasting of API Std 650 floating-roof tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API Std 650 floating-roof tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.The characteristics of the API Std 650 floating-roof tanks internal floating roof structure of API 650 petroleum storage tanks: the inner floating roof or inner floating plate refers to the floating roof that floats on the liquid surface of the oil tank with the oil and liquid up and down. The API Std 650 floating-roof tanks inner floating roof is used to cover the liquid. The surface is currently recognized as the most ideal and most economical and practical way to reduce oil evaporation loss.Aspire to technological innovation and pursue first-class quality steel API Std 650 floating-roof tanks products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.BBN company is an industry leading steel service center that supplies a full line of hot rolled steel plate in a variety of sizes, grades and finishes. Hot rolled steel is an economical option that offers reliable performance and versatility. In the API Std 650 floating-roof tanks hot rolled process, high temperature is used to heat the steel above its recrystallization point. In this state it becomes more malleable, allowing it to be easily formed into a variety of shapes. If you are interested in A36 hot rolled plates price, welcome to come and visit us.