API Std 650 flexible liquid storage tanks selection guidelines

Sand blasting and derusting of API Std 650 flexible liquid storage tanks uses compressed air as power and SiC, pomegranate sand and quartz sand as spraying materials to form high-speed jet beam, which is used to remove rust and dirt on the surface of metal storage tank and improve the binding force of workpiece with coating and plating material. Sand blasting is often used in API Std 650 flexible liquid storage tanks construction.

Design of Compression-ring Regions
In this project, a cylindrical tank 30 ft in diameter is designed for an internal pressure of 5 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 Grade A steel for thicknesses of 1/2 in. and less. The top course of the butt- welded cylindrical sidewall is 1/4 in. thick, including a 1/16 in. corrosion allowance. The tank API Std 650 flexible liquid storage tanks roof is a butt-welded spherical dome with an internal radius of 30 ft and a thickness of 1/4 in., including a 1/16 in. corrosion allowance. The maximum design liquid level is 6 in. below the plane of the juncture of the roof and sidewall.

API 650 external floating roof storage tanks are generally called external floating roof API Std 650 flexible liquid storage tanks tanks, which means that the storage tanks are externally open tanks without a dome design, and are equipped with vertical floating roofs. API 650 external floating roof storage tanks are usually used for large More than 20,000 cubic meters of open steel API Std 650 flexible liquid storage tanks storage tanks for storing volatile petroleum products such as crude oil, gasoline, kerosene, etc.