API Std 650 flexible liquid storage tanks drains

The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API Std 650 flexible liquid storage tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.

Proper use of API Std 650 flexible liquid storage tanks and precautions:
1. The API Std 650 flexible liquid storage tanks must be used within the safe height range;
2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;
3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;
4. The oil level in the API Std 650 flexible liquid storage tanks should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;
5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.

Inspection of low-pressure storage tank Butt-weldsComplete penetration and complete fusion is required (to the degree mandated by the acceptance criteria for examination method utilized) for welds joining tank wall plates to API Std 650 flexible liquid storage tanks tank wall plates. Examination for quality of welds shall be made using either the radiographic method specified in API 620 standard 7.15.1 and applied in 7.17, or alternatively, by agreement between the Purchaser and the Manufacturer, using the ultrasonic method specified in 7.15.3.1. In addition to the radiographic or ultrasonic examination, these welds shall also be visually examined as specified in 7.15.5. Furthermore, the Purchaser’s inspector may visually inspect all butt-welds for cracks, arc strikes, excessive undercuts, surface porosity, incomplete fusion, and other defects.

Our quality control department will do inspection for details of the steel materials API Std 650 flexible liquid storage tanks before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

Our company's logistics breaks through the perspective that the center of transportation service is ability, and emphasizes that the purpose of transportation service is customer first. Customer demand determines the content and mode of transportation service, while production is often small batch, diversified and consumer demand tends to be diversified. In the case of personalization, our logistics service also provides personalized service projects.