API Std 650 flat-bottom steel tanks seals

The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API Std 650 flat-bottom steel tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.

In the petrochemical industry and other industries, large vertical API Std 650 flat-bottom steel tanks are often used to store various production raw materials. Usually, the medium with high melting point and easy to crystallize at room temperature can be exported and used after heating, which involves the heating of large vertical storage tanks. The heating system is an auxiliary facility for heating of large vertical storage tank. It is often necessary to design external heating coil or internal heating coil system.

API Std 650 flat-bottom steel tanks Liquid Relief ValvesA tank, which is likely to operate completely filled with liquid, shall be equipped with one or more liquid relief valves at the top of the roof, unless otherwise protected against overpressure. When such valves are, in effect, supplementary relief devices, they may be set at a pressure not greater than 1.25 times the design pressure. Because the relief valve at the pump, which provides the inflow of liquid to the tank, is set at a pressure greater than 1.25 times the design pressure of any tank that may be built under these rules, provision should be made for preventing overfilling of the tank by a self-closing float valve, by some practicable pilot-valve control, or by any other proven device.

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API Std 650 flat-bottom steel tanks specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.

The company adheres to the needs of customers, adheres to win-win integrity, and relies on scientific and technological innovation to continue to improve the level of logistics equipment technology and information technology, and enhance the logistics technology research and development and innovation capabilities. Based on market demand and innovation as the driving force for development, the company actively expands the field of logistics services, accelerates the extension of the logistics industry chain, and scientifically advances the diversification of the logistics industry.