API Std 650 flat-bottom steel tanks division of responsibility
According to API standard 650, the stairs used for API 650 petroleum storage tanks or thermal insulation tanks should be double longitudinal beams supported by a minimum of ribs. If the gap between the API Std 650 flat-bottom steel tanks tank shell and the stringer of the API 650 petroleum storage tank exceeds 200mm, handrails should be provided on both sides of the stairs. Unless otherwise specified, according to API Std 650 flat-bottom steel tanks ASTM A123, the following accessories shall be hot-dip galvanized. The damaged zinc coating should be repaired with zinc alloy.
Manufacturer’s Report and CertificateUpon completion of all tests and inspections on each tank API Std 650 flat-bottom steel tanks, the Manufacturer shall prepare a report summarizing all the data on the tank, including foundations (if they are within the Manufacturer’s scope of responsibility) and shall attach to the report all drawings and charts as required by other paragraphs in this section of the rules (see API 620 tank 7.13 and Appendix M).The tank Manufacturer shall furnish and fill out a certificate for each tank (such as that shown in Appendix M), attesting that the tank has been constructed according to the rules in this standard. This certificate shall be signed by the Manufacturer and the Purchaser’s inspector. This certificate, together with the nameplate or markings placed on the tank, shall guarantee that the Manufacturer has complied with all applicable requirements of these rules.
The manufacturing requirements of bottom plate of vertical metal tank, API Std 650 flat-bottom steel tanks are as follows: 1. In order to compensate welding shrinkage, the layout diameter of tank bottom is 5-2mm than the design diameter; 2. The butt joint of edge plate of tank bottom shall be machined automatically or semi-automatically; 3. The distance between any two adjacent welding joints on the tank bottom plate and the distance between the butt joint of edge plate and the longitudinal weld of bottom ring wall plate shall not be greater than 200 mm.
Product concept: take the technology leading as the pillar of the enterprise, achieve the development goal of the enterprise with the reliable products, the reliable technology and the trustworthy services, and devote to the creative reform activities leading in the technical development and career of the industry to create new value through continuous change.
In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.
Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.
