API Std 650 austenitic stainless steel storage tanks intermediate wind girders

Prefabrication requirements of API Std 650 austenitic stainless steel storage tanks, large vertical storage tank wall panels:
1. The prefabrication of wall panel shall be processed in strict accordance with the requirements of the drawings, and inspection records shall be made.
2. After the wall panel is rolled, it should be placed on the platform for inspection with a template. In the vertical direction, use a straight-line template to check, the gap should not be greater than 2 mm, and in the horizontal direction, use an arc-shaped template to check, and the interval should not be greater than 4 mm.
3. When wall panels are rounded, attention should be paid to prevent irreversible plastic deformation caused by external forces. After rolling, it should be placed on the platform for inspection, and then placed on the prepared mold.Investigation of Subgrade
On actual steel storage tank sites to be used, test borings or test pits, or both, may be made at the direction of a competent engineer who will specify the number and location. They need not be equally spaced but should be laid out to uncover possible weak spots.
In general, test loadings of subgrade at the bottom of test pits need be resorted to only when such heavy loading as may be imposed by footings for major column supports for spheres or similarly elevated API 620 low-pressure tanks is specified. Results may be deceptive if average load-bearing capacity over a considerable area is wanted. All field data shall be recorded with maps, and copies shall be supplied to all engineers concerned with design, erection, and later operation.API 650 internal floating roof oil tank executive standard: domestic design standard: GB50341-2003 "Vertical cylindrical steel welded oil tank design code"; domestic construction standard: GB50128-2005 "vertical cylindrical steel welded oil tank" Construction and Acceptance Specification; API Std 650 austenitic stainless steel storage tanks Foreign design standard: API650-2007 "Standard for Welded Steel Petroleum Storage Tanks."Aspire to technological innovation and pursue first-class quality steel API Std 650 austenitic stainless steel storage tanks products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.We are known as API Std 650 austenitic stainless steel storage tanks leading manufacturers, suppliers and exporters in the market all over the world. We engage in providing a wide range of plates which are accurately mass produced by using the best quality of parts which gives maximum durability and dependability. The most important thing to know as a potential customer of IRON&STEEL is that we API Std 650 austenitic stainless steel storage tanks stock, processing service, and distribute all of the popular grades of carbon steel plate, alloy steel, shipbuilding steel and boiler steel. Welcome to come China and visit our factory.