API Std 650 aluminum tanks of relatively small capacity

The effect of air pressure on the API Std 650 aluminum tanks tank walls of the API 650 tank must be considered when the design pressure is greater than 2 kPa.The fixed point method can be used to design the tank wall of atmospheric or micro internal pressure API Std 650 aluminum tanks storage tank.

The elastic filling and sealing of floating roof API Std 650 aluminum tanks is to fill the elastic and changeable objects in the sealed envelope, and the sealing purpose depends on the compression deformation of the filler. This kind of sealing effect is good, the requirement of the geometry of tank wall is not too high, and the adaptability is strong. However, the elastic filling and sealing has poor wear resistance and is easy to deform and damage in long-term use.

API Std 650 aluminum tanks Liquid Relief ValvesA tank, which is likely to operate completely filled with liquid, shall be equipped with one or more liquid relief valves at the top of the roof, unless otherwise protected against overpressure. When such valves are, in effect, supplementary relief devices, they may be set at a pressure not greater than 1.25 times the design pressure. Because the relief valve at the pump, which provides the inflow of liquid to the tank, is set at a pressure greater than 1.25 times the design pressure of any tank that may be built under these rules, provision should be made for preventing overfilling of the tank by a self-closing float valve, by some practicable pilot-valve control, or by any other proven device.

The company has a group of experienced steel plate continuous processing line construction, production management, operation and professional and technical personnel. The company is a modern enterprise integrating scientific research and development, production processing, sales and service. Our main products include hot rolled plates, seamless pipes, API Std 650 aluminum tanks and steel structures. At the same time, it also adheres to international standards and adheres to the international line.

The main competitive means adopted by major domestic ports are to expand ports, build deep-water berths and channels, improve service quality to reduce the comprehensive cost of customers, and at the same time, to improve competitive advantage, we should also take appropriate measures to reduce relevant costs and prices.