API Std 650 aluminum tanks adjustable legs
Before pressure testing, thoroughly flush the API 650 tank floating roof primary drain hose system. Supply API Std 650 aluminum tanks blind flanges, gaskets, and bolting (for other types of blanking covers as may be required) necessary for testing.
In this project, a cylindrical tank 62 ft 6 in. in diameter is designed for an internal pressure of 4 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 steel with appropriate grades for different plate thicknesses in accordance with Table 4-1 for a design metal temperature less than 65°F but not less than 25°F. No corrosion allowance is required for any portion of the tank. The top course of the butt-welded cylindrical sidewall is 1/4 in. thick. The roof is a single lap-welded spherical dome with an internal radius of 50 ft and a thickness of 1/4 in. The maximum design liquid level is 6 in. below the plane of the juncture of the tank API Std 650 aluminum tanks roof and sidewall.
During the use of API Std 650 aluminum tanks, the tank material is prone to crack and leakage under the action of pressure, corrosion, wear and other conditions. Especially in the oil producing area, the temperature difference in four seasons is large and the natural environment is bad, which will accelerate the consumption of oil storage tank and cause many potential safety hazards. Therefore, the API Std 650 aluminum tanks must undergo strict inspections before being put into use after the production and installation are completed, so as to avoid cracks and leakage in short-term use and affect production safety.
Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.
The company's logistics department has the ability to monitor the whole process of logistics. We monitor the goods in transit through advanced information technology and communication technology, timely discover and handle problems in the transportation process, and ensure the steel materials are delivered to the destination in a timely and safe manner. The professional logistics team provides powerful support for good comments of customers and good reputation of the company.
We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
