API standard API Std 650 open-top tanks

The technology center has always been focusing on application research, improving market realization and scientific and technological contribution rate; taking user demand as the goal, highlighting the personalized development of products; taking the joint development of industry, University and research, and technology integration as the means, improving the starting point and level of innovation, and realizing the breakthrough of core technology; taking advanced research as the guide, pursuing the leap of technological development; taking system and mechanism innovation as the driving force, Promote and realize the working concept of technological innovation.

The process parameters should be strictly controlled in sand blasting of API Std 650 open-top tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.

Impact Requirements for Controlled-rolled or Thermo-mechanical Control Process (TMCP) Plates: Subject to the approval of the Purchaser, controlled-rolled or TMCP plates (material produced by a mechanical- thermal rolling process designed to enhance the notch toughness) may be used where normalized plates are required. API 620 welded storage tanks each used plate, as rolled, shall be Charpy V-notch tested to the requirements of R.2.1.2.