API standard 650 welded aluminum storage tanks drain system

There is a gap of 100 mm to 500 mm between the shell of API 650 crude oil storage API standard 650 welded aluminum storage tanks tank and the floating plate of external floating roof to ensure that there is no chuck during operation. Use API standard 650 welded aluminum storage tanks edge sealing system to reduce edge evaporation. The support legs of API 650 crude oil tank floating roof are usually movable and retractable and suspended in liquid.

The coating on the outer wall of API standard 650 welded aluminum storage tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API standard 650 welded aluminum storage tanks with white coating can reduce the evaporation consumption of the oil tank.

In this project, the area of tank wall used is of the same construction, material, and geometry as that described in F.1.3.1 except that the thickness of the plate is 3/8 in. The wall is stressed in the same manner as is described in F.1.3.1. A corrosion allowance of 1/16 in. is required. The computed (meridional) tensile stress, stc, in the net thickness after deduction of the corrosion allowance is 8000 lbf/in.2.
The problem in this example is to find the maximum allowable (latitudinal) compressive stress value for the given conditions, in conformance with the provisions of API 620 tank standard 5.5.4.5.
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A285, Grade C, steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

The company's logistics team adheres to the development concept of “gathering advantages, providing superior services, creating value, and leading the market”, and tightly focuses on the strategic positioning of “developing large-scale steel logistics and building large-scale steel supermarkets”. Facing the whole country and integrating into the world to build an "one center, one network" international circulation system. Through the development of 5-10 years, it is expected to form a modern steel industry with annual operating income exceeding 2.5 billion yuan.