API standard 650 vertical welded storage tanks carbon steel anchor straps

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.The ring of API standard 650 vertical welded storage tanks annular plates shall have a circular outside circumference, but may have a regular polygonal shape inside the tank shell with the number of sides equal to the number of annular plates. These pieces shall be butt-welded in accordance with API Standard 620 R.7.1.1, Item b. The plates of the first shell course shall be attached to the annular bottom plates by welds as required by API Standard 620 5.9.5 except when a full penetration weld is used or required.The interior of API 650 storage tanks to be internally lined or coated must have all edges rounded to a minimum of 3 mm radius. Internal welds must be completely seal welded, ground smooth, and free from API standard 650 vertical welded storage tanks surface porosity, pockets, and high spots. Remove weld spatter. Vendor as specified on API 650 storage tanks drawing must perform additional surface preparation.Integrity based:To customers, we should value our credit and keep our good image forever.To colleagues: respect each other, trust each other, make efforts togetherService first:Customer satisfaction is always the first pursuit.The company provides customers with not only advanced technology and high-quality API standard 650 vertical welded storage tanks products, but also the spirit of credit and service.Innovation:We are good at learning, drawing on the strengths of all, innovating and developing, introducing, researching and developing the latest technology, and making our products have a stronger vitality.In the petrochemical industry and other industries, large vertical API standard 650 vertical welded storage tanks are often used to store various production raw materials. Usually, the medium with high melting point and easy to crystallize at room temperature can be exported and used after heating, which involves the heating of large vertical storage tanks. The heating system is an auxiliary facility for heating of large vertical storage tank. It is often necessary to design external heating coil or internal heating coil system.