API standard 650 SUG III tanks with tall shells

The API standard 650 SUG III tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

Oil, Gas, Chemical, Water, and Bio-Fuel storage. Maximum of the most common welded steel tanks used in industry are designed following API 650. Tanks typically found in Refinery API standard 650 SUG III tanks tank farms, Terminals, Pipelines, and other process facilities use these tanks.

In 2015, we participated in an tender for oil and casing pipe in Pakistan. Because of our professional service and company strength. The end user chose us as the final contractor of the project of 22000 meters pipes of different sizes production. It takes us about 3 months to produce all the pipes API standard 650 SUG III tanks . We use bulk vessel to ship the pipe to Karachi port. Our engineers went to Karachi port to inspect the condition along with the customer when ship arrive. The customer gave high appraise to the pipe quality and our service

The main content of the inspection of the safety management of metal atmospheric API standard 650 SUG III tanks is whether the filed data of the storage tanks are complete; whether the operators have received safety management training; whether the problems detected in the past have been resolved. The main inspection content of the tank body of the metal atmospheric pressure storage tank is whether the tank top, tank wall, and bottom plate of the storage tank are deformed, dented, seepage and perforation, etc.; whether the API standard 650 SUG III tanks accessories are complete and whether there are any abnormalities; No sinking, tilting, etc.

There is a careful, patient, enthusiastic and thoughtful after-sales team, a professional distribution, ultra-efficient warehouse and logistics center, a marketing team with marketing expertise, an innovative technology center with strong steel technology, an experienced manufacturing center with rigorous professionalism Quality Inspection Center, an operation team with many years of administrative management experience. Such a strong combination of teams makes BEBON a steel giant in Henan Province.