API standard 650 petroleum storage tanks avoidance of pockets

Under the condition of static storage without receiving and sending operation, the temperature of gas space, evaporation rate, depth and pressure of vapor in the API standard 650 petroleum storage tanks will change with the change of temperature and pressure in a day. The oil loss caused by the process of discharging oil vapor and inhaling air gas is called "small breathing" loss, which is also called static storage loss of oil tanks.

API 650 petroleum storage tank has the advantages of high safety: the API standard 650 petroleum storage tanksinner floating plate floats on the liquid surface, so that the liquid phase has no evaporation space, which can reduce the evaporation loss by 85% to 90%. At the same time, the API 650 petroleum storage tank blocks the air and liquid storage through the floating disk, which reduces air pollution and reduces the degree of fire risk.

In this project, an area of steel storage oil tank wall is constructed of ASTM A285, Grade C, steel plate that is 5/8-in. thick and has spot-radiographed, double-welded butt joints. The wall is subject to tension in a meridional direction and to compression in a latitudinal direction. The values of R1 and R2 at the point under consideration are 75 in. and 300 in. respectively. A corrosion allowance of 1/16 in. is required. The computed (meridional) tensile stress, stc, in the net thickness after deduction of the corrosion allowance is 6000 lbf/in.2.

Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.