API standard 650 mixed material tanks slab foundations

We have Business Department, Transportation Department, Document Department, Shipping Department, E-C department, Procurement Department, Finance Department, Human Resources Department, Administration Department, Logistics Department, After-sales so on Departments. Each department performs its own duties, unites and cooperates, and contributes its greatest strength to the overall operation of the company. So as to ensure the stable and sustainable development of the company.Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API standard 650 mixed material tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.API 650 storage tank stipulates that if the thickness of the lower wall panel obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 mixed material tanks hydrostatic pressure test (both do not include the corrosion allowance).[Enterprise Spirit]: professional, honest, dedicated and innovative.[Enterprise Tenet]: provide customers with satisfactory steel products and services.[Enterprise Policy]: customer satisfaction is our pursuit. The trust of customers is our achievement.[Service Tenet]: to develop the market with quality and grow with sincerity.The company adheres to the commitment of quality first and customer foremost, takes high quality and high efficiency as the service principle, takes mutual benefit and common development as the business purpose.Weld inspection of API standard 650 mixed material tanks, vertical oil tank wall plate: In the welding inspection process of oil tank wall plate, attention should be paid to the defects of thick wall plate, such as incomplete penetration, incomplete root fusion and cracks. If there is a root incomplete penetration defect, it is necessary to open the weld joint with carbon arc air gouging and grinding machine grinding, or even weld through, and then weld again after the defect is removed.