API standard 650 mechanically-anchored steel tanks roof manufacturer
Except as permitted by API standard 620 Q.8.6, the test shall be conducted after the entire tank is complete, before the insulation is applied. Except as limited by foundation or stress conditions, the test shall consist of filling the tank with water to the design liquid level and applying an overload air pressure of 1.25 times the pressure for which the vapor space is designed. The load on the supporting foundation shall preferably not exceed the established allowable bearing value for the tank site. Where a thorough evaluation of the foundation justifies a temporary increase, the established allowable bearing may be increased for the test condition, but the increase shall be not more than 25%.
Before pressure testing, thoroughly flush the API 650 tank floating roof primary drain hose system. Supply API standard 650 mechanically-anchored steel tanks blind flanges, gaskets, and bolting (for other types of blanking covers as may be required) necessary for testing.
In year 2015, we ship 750 tons H beam to Pakistan for our old customer for building use. Because of urgent demand, the H beams are partial shipment by bulk vessel. Due to strong support of our customer, we also export many C channel steel, API standard 650 mechanically-anchored steel tanks I beam and other profile steel to local market.
}Prefabrication requirements for API standard 650 mechanically-anchored steel tanks, large vertical storage tanks:1. The machined surface of the edge of the steel plate should be smooth, and there should be no defects such as slag inclusion, delamination, cracks, etc., and the surface hardened layer produced by the flame cutting groove should be removed.2. Dimension deviation after steel plate processing: the deviation of plate width is less than 1.5 mm, the deviation of plate length is less than 2 mm, and the difference between diagonals is less than 3 mm.
Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.
