API standard 650 mechanically-anchored steel tanks manhole cover plates

There is no dome roof in the top of the vertical external floating roof oil storage tank, only the disc floating roof which can float up and down. The wall plates are connected by butt welding, and the construction is usually carried out by the forward installation method, and the storage capacity is usually more than 10000 cubic meters. Vertical internal floating roof API standard 650 mechanically-anchored steel tanks has both dome roof and internal floating roof. The internal floating roof floats on the liquid surface inside the dome roof oil tank and can float up and down. The storage capacity is usually between 1000 and 10000 cubic meters.

The API standard 650 mechanically-anchored steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

The API 650 is widely used for tanks designed to withstand low internal pressures, for the API standard 650 mechanically-anchored steel tanks storage of typical products such as crude oil, petrol, chemicals and water. We have extensive experience when it comes to API 650 tanks, varying from tanks built in the factory up to +/- 500m3, to tanks built on-location up to +/-15,000 m3.

We specialize in the production and sale of steel products. We have many customers from all over the world. Our products API standard 650 mechanically-anchored steel tanks have strict quality inspection departments, so we have absolute quality and technical advantages. Good promotion system, with advanced business philosophy, create development space, enhance the value of employees, improve the quality of life as the mission. Pursuing green procurement, energy conservation and consumption reduction.

If you are in the search of best quality of API standard 650 mechanically-anchored steel tanks structural steel plate then you have landed on the right place. These high quality structural steel plates are used for a long time as they have a long life due to their best and advance manufacturing techniques. These API standard 650 mechanically-anchored steel tanks plates are best and ideal for temperature rise work, high pressure and tank fabrication work where accurate & excellent toughness is required for better results. Welcome to our factory. We supply our products to all the leading industries and customers who are satisfied with our production and quality.