API standard 650 mechanically-anchored flat-bottom tanks examination requirements

In addition to our own truck fleet, we also have long-term cooperation with certain logistics companies to ensure that we can deliver API standard 650 mechanically-anchored flat-bottom tanks goods in time and smoothly. At the same time, because of the long-term cooperation and huge shipping volume, we can get a good transportation price and save transportation cost for the company and customers. Meanwhile, we have Shipping Department to arrange shipping work in advance. So as not to waste time on transportation both in land and on the sea.Preheating should be performed by heating and maintaining this heat in appreciable lengths of the joint to be welded, preferably using a strip burner with a mild flame rather than a harsh flame such as that from a cutting torch. Electrical strip heaters are available and have been found to be satisfactory. The preheat of 300°F should be checked with a temperature-sensitive crayon, or similarly accurate means, so that the steel 4 in. (or four times the API standard 650 mechanically-anchored flat-bottom tanks plate thickness, whichever is greater) on each side of the joint will be maintained at the minimum preheat temperature. Ring burners or heaters are recommended for nozzle and manway welds. At no time during the welding should the base metal fall below a temperature of 300°F.Welcome to our company to purchase, our products are exported to all parts of the world every month, the quality is guaranteed, the API standard 650 mechanically-anchored flat-bottom tanks price is very preferential. Therefore, it has won great trust and praise from customers. Every month, it needs to purchase some steel plates, steel pipes and other major products. If you have any need, please contact us in time!API 650 is constructed from carbon steel, austenitic duplex stainless steel, and API standard 650 mechanically-anchored flat-bottom tanks aluminium A Welding Certification is stipulated by American Society of Mechanical Engineers (ASME), Section 10. There is a required inspection, no third party. The inspection cost is the cost of the NDE.Usually, the soil resistance of the foundation should be considered before the design and construction of API standard 650 mechanically-anchored flat-bottom tanks. The soil endurance in the API standard 650 mechanically-anchored flat-bottom tanks construction area plays a decisive role in the basic cost of the tank. In areas with high soil resistance, not only the cost of foundation treatment can be greatly reduced, but also the ratio of height to diameter of storage tank can be obtained. Therefore, the investment cost of the API standard 650 mechanically-anchored flat-bottom tanks can be greatly saved in the area with large soil resistance.