API standard 650 ground supported tanks intermediate wind girders
Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API standard 650 ground supported tanks internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.
Strictly controlling the temperature in the API standard 650 ground supported tanks can effectively reduce the volatile consumption of oil in large oil storage tanks. Because the higher the temperature in the oil storage tank, the stronger the activity of oil molecules and the greater the volatilization consumption of the oil. Therefore, the temperature in the API standard 650 ground supported tanks must be reduced as much as possible. It is possible to reduce the direct sunlight temperature by painting white anticorrosive paint with good light reflectivity. It is also possible to use spray equipment to wash the top and wall of the API standard 650 ground supported tanks with water flow to reduce the volatilization consumption of the oil in the storage tank.
Except as permitted by API standard 620 Q.8.6, the test shall be conducted after the entire tank is complete, before the insulation is applied. Except as limited by foundation or stress conditions, the test shall consist of filling the tank with water to the design liquid level and applying an overload air pressure of 1.25 times the pressure for which the vapor space is designed. The load on the supporting foundation shall preferably not exceed the established allowable bearing value for the tank site. Where a thorough evaluation of the foundation justifies a temporary increase, the established allowable bearing may be increased for the test condition, but the increase shall be not more than 25%.
Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;
BBN company is a modern enterprise integrating steel producing, warehousing and logistics, processing and distribution. We are committed to creating a "one-stop steel procurement service" platform. The main products are I-beam, angle steel, API standard 650 ground supported tanks , H-beam, hot-rolled coil, welded pipe, spiral pipe seamless pipe and many other steel products. Standing stocks amount to more than 30,000 tons, and complete specifications, the company gradually moves towards large-scale distribution enterprises with serialized products, standardized services and modern transportation management.
