API standard 650 ground-supported liquid storage tanks seal membrane

API 650 petroleum storage tank body design is mainly the design of tank bottom, API standard 650 ground-supported liquid storage tanks tank top and tank wall, and the design of tank wall is particularly important. As the main pressure bearing part of API 650 petroleum storage tank, the tank wall bears loads including liquid pressure, wind pressure, seismic load, opening stress, etc. The calculation of such loads is explained in detail in various API standard 650 ground-supported liquid storage tanks storage tank design standards. But in addition, the API 650 petroleum storage tank wall also bears the push-pull force and torque of the connected pipeline.

API standard 650 ground-supported liquid storage tanks, floating roof tank is composed of vertical cylindrical tank wall and floating roof, which is floating on the surface of liquid storage. The volume of floating roof storage tank is generally large, and its bottom plate is arched edge plate. The difference between floating roof tank and other types of storage tank is that there is a floating top cover floating on the surface of liquid storage, and the top cover floats up and down with the rise and fall of liquid storage.

API standard 650 ground-supported liquid storage tanks Visual InspectionUpon completion of all the foregoing tests, the pressure in the tank shall be released and a thorough visual inspection shall be made of both the inside and outside of the tank, giving particular attention to all internal ties, braces, trusses, and their attachments to the walls of the tank. Anchors shall be checked for snug tightness and adjusted if required. Anchor threads shall be fouled by peening or tack welding to prevent loosening. In lieu of thread fouling, double nuts may be used.Rate of Water Filling and Water TemperatureThe rate at which water is introduced into a tank for a hydrostatic test shall not exceed 3 ft of depth per hour. The foundation, venting equipment, or other conditions may limit the water filling to a lower rate. Pressure shall not be applied above the surface of the water before the tank and its contents are at about the same temperature.

Our company's technical department is the core department of the whole company. There are a group of very professional technical personnel. They provide some architectural drawings according to the ideas of customers, and they are responsible for how to select the right materials. Including the evaluation of steel products such as multi steel plate, API standard 650 ground-supported liquid storage tanks and steel pipe, grasp the whole production process, and strictly follow the production standards and customer quality requirements.

As we all know, steel pipes occupy more space in the process of transportation. If there is no good way of packing, the transportation cost for steel pipes will be a big expense. In view of this characteristic, our company is ingenious and adopts the nest package method to solve this problem perfectly. The premise of the nest package is that the diameters of the steel pipes are different, and the small diameter pipe is inserted in the large diameter pipe. This not only saves the volume, but also saves the transportation cost. It also reduces the loading and unloading workload by half, saves precious time, and enables customers to receive goods earlier.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!