API standard 650 ground supported flat-bottom tanks diameter

Large Steel storage tank Anchorage
In addition to the loads in API 620 oil storage tank Q.4, Q.5.1, and Q.5.2, the anchorage for the tank that contains liquid, whether it be a single-wall tank or the inner tank of a double-wall tank, shall be designed to meet the requirements of Q.3.6.2 through Q.3.6.5. The anchorage shall accommodate movement of the tank wall and bottom caused by thermal changes. For anchored flat-bottom tanks, the anchorage shall be designed as described in Q.3.6.4.1 through Q.3.6.4.3.

While GB50341 generally takes the weld coefficient as 0.9;When the minimum yield strength of API standard 650 ground supported flat-bottom tanks steel plate is greater than 390 MPa, take 0.85. The thickness of API 650 tanks is generally smaller than that of GB50341, and this difference is particularly evident in the design of large tanks, where the overall weight of the tanks varies greatly.

our company offered 2950 ton A36 steel API standard 650 ground supported flat-bottom tanks plate to Philippines customer, which was used to build water supply project. It is the government project. The procurement with their project engineer come to China to discuss this project in middle of 2016. After checking the mill, they signed the contract with us. we supply the ASTM A36 Original Mill Test Certificate Stamped.

API standard 650 ground supported flat-bottom tanks weld tightness test: remove dirt from the API standard 650 ground supported flat-bottom tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.

First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.